Suppose that a wing component on an aircraft is fabricated from an aluminum alloy that has a plane strain fracture toughness of 40 mpa √m (36.4 ksi √ it has been determined that fracture results at a stress of 365 mpa (53,000 psi) when the maximum internal crack length is 2.5 mm (0.10 for this same component and alloy, compute the stress level at which fracture will occur for a critical internal crack length of 4.0 mm (0.16
Problem 1. SAE 50 oil flows at a mass flowrate of 0.007 kg/s through a 1-cm I. D. tube that is 1.5 m
Vworld34October 23, 20213 Comments
1. Some bacteria are helpful to the body and: a. cause cavities b. die quickly outside other living cells c. help the digestive
Gabflips7267October 23, 20213 Comments
A fan that can provide air speeds up to 45 m/s is to be used in a low-speed wind tunnel with atmospheric
Zel117October 23, 20213 Comments
The rotating element in a mixing chamber is given a periodic axial movement z = z0 sin 2πnt where z0
Slend3rpiggyOctober 23, 20214 Comments
A simple electric circuit is composed of a 1.5 V AAA battery and a 5.1 kΩ load. What is the circuit current? (Convert answer
mobeteOctober 23, 202110 Comments
This Post Has 4 Comments
D) pirates hope it ..
the answer is d
Electronically let me know if that’s right .